This model comes as several files. Tap one to preview it, and tick the part(s) you’d like us to print.
Yoshi Egg Drawer Handle
Printed for you, made to order
Colour · printed in PLA
No preference selected, we’ll choose a colour that suits.
About this model
<p>Note: The model shape itself was traced by hand by me, and extruded to a half-egg shape. Claude -> Fusion MCP was used to modify the spots for the glue version. This model therefore was not primarily AI generated, but rather AI assisted in some of the more advanced features.</p><p><strong>Hardware: Per each egg, you need a M3 nut, and a M3 screw. To fit just the spacer and egg, you need a ~30mm screw, but when adding on drawer width you may need 45-50mm screw in total.</strong></p><p>This model contains 2 versions: A print-in-place version for multi-material systems like MMU3 or INDX, with no gaps between the egg and spots, and a non-multi-material version for gluing the spots into place which includes a small gap between the spots and egg.</p><p><strong>When printing, add a pause at the top of the nut hole, and insert a M3 nut. If you have different sized nuts/screws, you can adjust this in the Fusion project.</strong></p><p>Recommended print settings: 15% gyroid infill, as small layer height as you can do (0.4mm nozzle -> 0.07mm). Recommended to print the glue version due to reduced waste.</p><p>I made this for my son's dresser, to replace his firetruck & car themed drawer pulls.</p>
Description by the designer on Printables.
How it works
- You pick the model; we fetch the designer’s file and print it in our UK workshop.
- Every piece is hand-finished and quality-checked before it ships, like everything in our shop.
- Printed in PLA, a plant-based material. More about our material.
This design was created and shared by an independent designer and remains their property. Every model offered for printing here has a licence that permits commercial printing. The original model page and licence are linked above.
