This model comes as several files. Tap one to preview it, and tick the part(s) you’d like us to print.
SIGNALIS - Eusan Nation Keychain
Printed for you, made to order
Colour · printed in PLA
No preference selected, we’ll choose a colour that suits.
About this model
<p>You can pick between a patternless back and a penrose embossed back, but as seen in the image I have found no way to prevent the bridging looking bad on the symbol without messing up the quality of the other side.<br><br>I recommend printing in 0.08 layer height on a .4 nozzle or smaller and infill set to 100%.</p><p>For good surface quality I enabled ironing with the following settings:</p><p>Ironing speed: 60mm/s<br>Ironing flow: 30%<br>Ironing line spacing: 0.15mm<br>Ironing inset: 0.21mm<br>Ironing angle: 45*</p><p>After printing I recommend lightly sanding the face for a smoother finish with 2000-2500 grit sandpaper, and make sure to use dry filament to prevent stringing.</p><p>The two parts fit together with tiny connectors, but are still best glued together with superglue.</p>
Description by the designer on Printables.
How it works
- You pick the model; we fetch the designer’s file and print it in our UK workshop.
- Every piece is hand-finished and quality-checked before it ships, like everything in our shop.
- Printed in PLA, a plant-based material. More about our material.
This design was created and shared by an independent designer and remains their property. Every model offered for printing here has a licence that permits commercial printing. The original model page and licence are linked above.
