This model comes as several files. Tap one to preview it, and tick the part(s) you’d like us to print.
IKEA RÅSEGEL / RASEGEL lampshade — open-top anti-glare
Printed for you, made to order
Colour · printed in PLA
No preference selected, we’ll choose a colour that suits.
About this model
<p>Sit-on shade for the IKEA RÅSEGEL concrete table-lamp base (Ø 80 mm, E27). Hides the bulb from eye level, lets light out through a thin wall, small side holes, and an open top.</p><p><strong>Fit</strong></p><ul><li><p>Rests on the top rim of the concrete base, around the socket</p></li><li><p>Bottom opening Ø 52 mm</p></li><li><p>Height 148 mm, top Ø ~152 mm</p></li></ul><p><strong>Design</strong></p><ul><li><p>0.9 mm wall — glows if you print in white or natural PLA</p></li><li><p>Solid mid band so you don’t stare at the globe</p></li><li><p>Small staggered holes low (table wash) and high (ambient)</p></li><li><p>Open top</p></li><li><p>LED only (the lamp is 13 W max anyway)</p></li></ul><p><strong>Print</strong></p><ul><li><p>PLA or PETG, white / natural / translucent</p></li><li><p>0.2 mm layers, 2 walls</p></li><li><p>No supports — print on the flat bottom ring</p></li><li><p>If it’s tight or loose on your base, scale X/Y ±2–3%</p></li></ul><p>Not an official IKEA part. Measure your base before a long print; listings call it 80 mm across.</p>
Description by the designer on Printables.
How it works
- You pick the model; we fetch the designer’s file and print it in our UK workshop.
- Every piece is hand-finished and quality-checked before it ships, like everything in our shop.
- Printed in PLA, a plant-based material. More about our material.
This design was created and shared by an independent designer and remains their property. Every model offered for printing here has a licence that permits commercial printing. The original model page and licence are linked above.
