This model comes as several files. Tap one to preview it, and tick the part(s) you’d like us to print.
Balloon Powered Water Blaster
Printed for you, made to order
Colour · printed in PLA
No preference selected, we’ll choose a colour that suits.
About this model
<p>Assembly: Connect the balloon holders together and connect them to the handle. Slide the T-shaped "pincher" through the bottom of the handle. slide the trigger into its groove and line up the square hole in the pincher so the trigger goes through. Press fit the smaller post through the handle and trigger. Once its assembled. attach 2 small hair ties or rubber bands to the top post on the front of the handle piece ad the T of the pincher at the bottom. Attach the front grip to the barrel, then attach the barrel to the handle at the hinge point and press fit the larger post. DONE!</p><p>Now, with the barrel break open, hold down the trigger to open the pincher and slide a long balloon down the opening. You must hold the trigger to keep the pincher open while filling. The hose adapter fits over the front to VERY CAREFULLY fill the balloon. Snap the front closed and throw that balloon over your shoulder. You are ready for battle. </p><p></p>
Description by the designer on Printables.
How it works
- You pick the model; we fetch the designer’s file and print it in our UK workshop.
- Every piece is hand-finished and quality-checked before it ships, like everything in our shop.
- Printed in PLA, a plant-based material. More about our material.
This design was created and shared by an independent designer and remains their property. Every model offered for printing here has a licence that permits commercial printing. The original model page and licence are linked above.
