This model comes as several files. Tap one to preview it, and tick the part(s) you’d like us to print.
foot anchor for CARBON 13 Printable Jointed Figure - Type F
Printed for you, made to order
Colour · printed in PLA
No preference selected, we’ll choose a colour that suits.
About this model
<p>I had trouble with the action figure toppling over when I tried awkward poses.... especially with high heels...</p><p>I have anchored the toe to a removable base so when the figure is attached to the toe you may swivel it around.</p><p>this is scaled to fit the 250% scaled version.</p><p>if you measure the toe on your model and scale the anchor to the same size,the joint will fit.</p><p>you remove the toe from your model and attach the joint to the anchor....</p><p>by changing the filament at the right layer, you can make the anchor toe the same as your model</p><p>also you can mirror it to fit the other foot insead....</p>
Description by the designer on Printables.
How it works
- You pick the model; we fetch the designer’s file and print it in our UK workshop.
- Every piece is hand-finished and quality-checked before it ships, like everything in our shop.
- Printed in PLA, a plant-based material. More about our material.
This design was created and shared by an independent designer and remains their property. Every model offered for printing here has a licence that permits commercial printing. The original model page and licence are linked above.
