This model comes as several files. Tap one to preview it, and tick the part(s) you’d like us to print.
Bird Feeder Rain / Weather Guard (v7)
Printed for you, made to order
Colour · printed in PLA
No preference selected, we’ll choose a colour that suits.
About this model
<p>After I let Codex and Fusion MCP make version 6 I decided it was more important the weather guard print without supports and less material than it was to avoid using hardware to assemble it. This version (v7), uses 2x M3 14-16mm cap head screws and 2x M3 nylon lock nuts. This one only comes in the 260mm size (so far). If other sizes are requested I'll make some.</p><p>Dome Printing Tips: PETG or ASA, 15% infill, 2 perimeters, no supports</p><p>Assembly: Insert the nylon lock nuts into the nylon lock nut shaped holes. Hold the two dome halves together and tighten the M3 screws until snug.</p>
Description by the designer on Printables.
How it works
- You pick the model; we fetch the designer’s file and print it in our UK workshop.
- Every piece is hand-finished and quality-checked before it ships, like everything in our shop.
- Printed in PLA, a plant-based material. More about our material.
This design was created and shared by an independent designer and remains their property. Every model offered for printing here has a licence that permits commercial printing. The original model page and licence are linked above.
