This model comes as several files. Tap one to preview it, and tick the part(s) you’d like us to print.
MX Keys Stand for a Living Room Table (F360 Parametric)
Printed for you, made to order
Colour · printed in PLA
No preference selected, we’ll choose a colour that suits.
About this model
<p>I use MX Keys Mini as a remote PC controller from my couch, and I always struggle where to store it. So I came up with this little stand. The keyboard has its own place now and it does not occupy the couch nor the precious space on the table, at least not too much of it.</p><p>The model consists of three parts - a clamp and a screw to be mounted onto the conference table, and a pad that goes on top of the octagonal part of the clamp. The pad has a 30 degrees tilt (default) and can be mounted on top of the clamp in 8 orientations, hence its octagonal shape. </p><p>The model is parametric, you can specify:</p><ul><li><p>Clamp width (default value 30mm) - how thick your table top is so that the clamp can be mounted to it</p></li><li><p>Keyboard angle (default value 30 degrees) - tilt of the pad </p></li><li><p>Height (default value 60mm) - how high the keyboard will be placed. To be precise, the value specifies length of the octagonal part of the clamp. </p></li></ul><p>To modify the parameter values, open attached f3d file in Fusion360 and go to „Modify“ -> „Change Parameters“. Attached STL files use the default values listed above.</p><p>Recommended print orientation is shown on attached picture - the clamp is meant to be printed on its side, the pad requires supports.</p><p></p>
Description by the designer on Printables.
How it works
- You pick the model; we fetch the designer’s file and print it in our UK workshop.
- Every piece is hand-finished and quality-checked before it ships, like everything in our shop.
- Printed in PLA, a plant-based material. More about our material.
This design was created and shared by an independent designer and remains their property. Every model offered for printing here has a licence that permits commercial printing. The original model page and licence are linked above.
