This model comes as several files. Tap one to preview it, and tick the part(s) you’d like us to print.
Parametric Reinforced Barbecue Wheel (OpenSCAD)
Printed for you, made to order
Colour · printed in PLA
No preference selected, we’ll choose a colour that suits.
About this model
<p>A fully parametric 3D-printable wheel for a barbecue, designed in OpenSCAD. The wheel is 140 mm in diameter and 70 mm wide, with an 8 mm hole for the mounting screw. It is built to be sturdy: a thick outer rim carries the tread, a reinforced hub surrounds the screw hole, and the side facing the barbecue support is lightened with thick spokes to save material and weight without giving up strength.</p><h3>Main features</h3><ul><li><p><strong>Outer tread</strong> with three selectable patterns: straight radial grooves, diamond cross-hatch and V-shaped chevrons.</p></li><li><p><strong>Reinforced hub</strong> around the screw hole, slightly protruding on both sides.</p></li><li><p><strong>Protruding collar (0.5 cm)</strong> on the inner side, the one resting against the support. It works as a spacer, so the wheel body does not rub directly on the bracket.</p></li><li><p><strong>Lightened support side</strong>: pockets between thick spokes are carved only from the side facing the support.</p></li><li><p><strong>Solid front face</strong>: the side opposite the support stays completely closed, so the wheel looks clean from the outside.</p></li><li><p><strong>Inverted-cone recess</strong> on the front face, leaving a raised hub in the centre.</p></li></ul><h3>Geometry at a glance</h3><ul><li><p>Outer diameter: 140 mm</p></li><li><p>Wheel width: 70 mm</p></li><li><p>Screw hole: 8 mm</p></li><li><p>Collar on the support side: 5 mm high, 50 mm in diameter</p></li><li><p>Hub: 30 mm in…
Description by the designer on Printables.
How it works
- You pick the model; we fetch the designer’s file and print it in our UK workshop.
- Every piece is hand-finished and quality-checked before it ships, like everything in our shop.
- Printed in PLA, a plant-based material. More about our material.
This design was created and shared by an independent designer and remains their property. Every model offered for printing here has a licence that permits commercial printing. The original model page and licence are linked above.
