This model comes as several files. Tap one to preview it, and tick the part(s) you’d like us to print.
Ikea Lack stacking corners
Printed for you, made to order
Colour · printed in PLA
No preference selected, we’ll choose a colour that suits.
About this model
<p>If you ever need to stack Lack tables on top of eah other, your best bet is to screw them together.<br><br>I wanted a non destructive way to achive the same goal and hence I created these corners.<br><br>Bootom piece slides up a leg and then gets interlocked with the top piece, that serves as a guide for the table on top.<br>This solution is not perfect by any stretch of imagination, but I stack 4 tables on top of each other this way nad it wiggles, but holds.<br><br><strong>Material</strong><br>I don't think material really matter, I used PLA</p><p><strong>Printing</strong><br>I recommend printing upright, most default settings are all right.<br>About 20% infill.<br>2 raft layers and suppports made it reasonably easy to remove all the excess material after cooldown<br>Adaptive layer height saves a ton of time.<br><br>I printed this on a core one and managed to stick 4 pairs (=8 pieces =1 complete set of corners) at once</p>
Description by the designer on Printables.
How it works
- You pick the model; we fetch the designer’s file and print it in our UK workshop.
- Every piece is hand-finished and quality-checked before it ships, like everything in our shop.
- Printed in PLA, a plant-based material. More about our material.
This design was created and shared by an independent designer and remains their property. Every model offered for printing here has a licence that permits commercial printing. The original model page and licence are linked above.
