This model comes as several files. Tap one to preview it, and tick the part(s) you’d like us to print.
Wall Bracket for Bamboo Plant Shelf – M10 Rod Mount L/R
Printed for you, made to order
Colour · printed in PLA
No preference selected, we’ll choose a colour that suits.
About this model
<p>The shelf's top frame bar rests in the bracket's pocket, and each bracket slides over an M10 threaded rod that was already sticking out of my wall, and is held by a nut (I used acorn/cap nuts for a cleaner look). Great way to reuse old rods/anchors without drilling new holes. Comes as a mirrored left/right pair – one for each end of the shelf. It's been holding a potted chili plant and a couple of pumpkins without any issue.</p><p>▶ Features</p><p>• Left + right version (mirrored)</p><p>• Single M10 threaded rod per bracket – reuses rods/bolts already in the wall, no new drilling</p><p>• Triangular gusset for stiffness</p><p>• Prints without supports</p><p>• Small and quick: ~30 × 46 × 30 mm, ~15 g each</p><p>▶ Hardware (per bracket)</p><p>• 1× M10 threaded rod or bolt in the wall (hole is Ø 10 mm)</p><p>• 1× M10 washer</p><p>• 1× M10 acorn (cap) nut</p><p>▶ Print settings (what I used)</p><p>• Material: PETG (outdoor use – handles sun and heat; avoid PLA, it softens in summer)</p><p>• Layer height: 0.2 mm</p><p>• Walls: 4, top/bottom layers: 4</p><p>• Infill: 20 % (crosshatch / gyroid)</p><p>• Supports: none</p><p>• Nozzle 240 °C / bed 80 °C</p><p>• Printed on an Artillery Sidewinder X1, 0.4 mm nozzle</p><p>▶ Tips</p><p>• The hole is exactly 10 mm – a snug fit on M10. If it's too tight, run a 10–10.5 mm drill bit through it by hand.</p><p>• Measure your shelf's frame bar before printing – the pocket fits my shelf, yours may differ.</p><p>• Don't overtighten the nut; snug…
Description by the designer on Printables.
How it works
- You pick the model; we fetch the designer’s file and print it in our UK workshop.
- Every piece is hand-finished and quality-checked before it ships, like everything in our shop.
- Printed in PLA, a plant-based material. More about our material.
This design was created and shared by an independent designer and remains their property. Every model offered for printing here has a licence that permits commercial printing. The original model page and licence are linked above.
