This model comes as several files. Tap one to preview it, and tick the part(s) you’d like us to print.
Snap-On Pipe Collar / Radiator Pipe Rosette (53 mm, 10 mm standoff) – Parametric OpenSCAD
Printed for you, made to order
Colour · printed in PLA
No preference selected, we’ll choose a colour that suits.
About this model
<p><strong>Snap-On Pipe Collar (Radiator Pipe Rosette)</strong></p><p>A neat cover for the ugly hole where a radiator or heating pipe comes out of the wall. It is a <strong>two-part design</strong>, so you can fit it <strong>without taking the pipe apart or sliding anything over the end of it</strong>.</p><p><strong>How it works</strong></p><ol><li><p><strong>Slide the collar onto the pipe from the side.</strong> The slot is much wider than the pipe, so it goes on with no force.</p></li><li><p><strong>Push the insert into the slot</strong> from the outside until it stops. Small snap bumps click into dimples in the collar and hold the insert in place.</p></li><li><p>That's it. To remove it, just pull the insert out again.</p></li></ol><p><strong>Features</strong></p><ul><li><p>Outer diameter <strong>53 mm</strong>, standing <strong>10 mm</strong> away from the wall</p></li><li><p>Default bore <strong>16 mm</strong> (adjustable – see below)</p></li><li><p>Elegant curved profile with a decorative bead and a fine ring on the flange</p></li><li><p>Hollow shell design: light, uses little filament, and sits flat on uneven walls</p></li><li><p>Snap bumps are placed in the solid neck area close to the pipe, not at the thin outer edge, so the insert cannot pop open</p></li><li><p>Prints <strong>without supports</strong></p></li><li><p>Includes ready-to-print STLs <strong>and the OpenSCAD source file</strong> so you can adapt everything</p></li></ul><p><strong>Customize it…
Description by the designer on Printables.
How it works
- You pick the model; we fetch the designer’s file and print it in our UK workshop.
- Every piece is hand-finished and quality-checked before it ships, like everything in our shop.
- Printed in PLA, a plant-based material. More about our material.
This design was created and shared by an independent designer and remains their property. Every model offered for printing here has a licence that permits commercial printing. The original model page and licence are linked above.
