This model comes as several files. Tap one to preview it, and tick the part(s) you’d like us to print.
Crown Of Thorns Cross - Flat Bottom
Printed for you, made to order
Colour · printed in PLA
No preference selected, we’ll choose a colour that suits.
About this model
<p>The original .STL file doesn't have a flat bottom, the intricate thorn design continues below the level of the cross, requiring extra supports. I fixed that "problem" for easier post-processing.</p><p>The fourth and fifth pictures compare the backs and fronts of the two crosses, with my remix on the left and the original on the right.</p><h3>Suggested Print Settings:</h3><ul><li><p>Material: PLA</p></li><li><p>Walls: 2</p></li><li><p>Layer Height: 0.2 mm</p></li><li><p>Infill: 15%</p></li><li><p>Brim: Unnecessary (unless you scale it down)</p></li><li><p>Supports: On (there is a small overhang at the bottom of the thorns)</p></li></ul><p>Only ⁓1.5 hour print at 15% infill!</p><h3>Multicolor:</h3><p>Insert pause between the last layer of the cross and the rest of the thorns. Between layer 40 and 41 at 0.2 mm layer height.</p><h3>Post-Processing:</h3><p>Remove supports at base of thorns.</p><p>Some stringing may occur at the top of the thorns. Just file it off.</p><p>Has a nail hole for mounting or you can use a command strip.</p>
Description by the designer on Printables.
How it works
- You pick the model; we fetch the designer’s file and print it in our UK workshop.
- Every piece is hand-finished and quality-checked before it ships, like everything in our shop.
- Printed in PLA, a plant-based material. More about our material.
This design was created and shared by an independent designer and remains their property. Every model offered for printing here has a licence that permits commercial printing. The original model page and licence are linked above.
