This model comes as several files. Tap one to preview it, and tick the part(s) you’d like us to print.
Arched Sword & Knife Display Stand – Push-Fit, Nearly Support-Free
Printed for you, made to order
Colour · printed in PLA
No preference selected, we’ll choose a colour that suits.
About this model
<p>A display stand in a classic arched design for cosplay swords, knives and other blade props. The blade stands edge-down in two forks.</p><p>The stand consists of <strong>3 parts</strong>: the arch and two feet that push onto the fork heads from below. This way every part prints in its best orientation:</p><ul><li><p><strong>Arch:</strong> lying on its side → only minimal support inside the wedge slot</p></li><li><p><strong>Feet:</strong> lying flat → no support (both feet are included in one STL, already laid out flat)</p></li></ul><p>The joint engages 15 mm deep and locks in both directions. If it’s too tight, sand it lightly or scale it little bit down; if it’s too loose, add a drop of super glue.</p><p>The slot is <strong>wedge-shaped</strong> and follows the blade’s cross-section, so the blade stands straight:</p><ul><li><p>At the edge: 3 mm</p></li><li><p>2 mm above: 6 mm</p></li><li><p>20 mm above: 17 mm</p></li></ul><p><em>(Includes 0.5 mm clearance per side – designed for a fabric-wrapped blade measuring 2 / 5 / 16 mm.)</em></p><p>Thinner blades will fit as well, they just sit a bit deeper. For thicker blades the slot needs to be widened.</p><p><strong>Assembled dimensions:</strong> 216 × 110 × 85 mm, 200 mm between the forks. All three parts fit together on a single 250 × 250 mm print bed.<br><br>Supports: only for the wedge slot on the arch (e.g. support painting)</p>
Description by the designer on Printables.
How it works
- You pick the model; we fetch the designer’s file and print it in our UK workshop.
- Every piece is hand-finished and quality-checked before it ships, like everything in our shop.
- Printed in PLA, a plant-based material. More about our material.
This design was created and shared by an independent designer and remains their property. Every model offered for printing here has a licence that permits commercial printing. The original model page and licence are linked above.
